와이어 로프 엔드 스탑

LASHING MATERIALS FOR MPP VESSEL Turnbuckles DIN 1480 Description Eye and eye webbing sling has an eye shape on each of its end points. They are common type of web slings. Its flexible and light weight making this sling versatile, and for many the preferred sling. A flat eye can be used in a choker hitch, basket hitch, or vertical hitch, while a twisted eye sling has eyes that are twisted 90° to form a better choker hitch. The slings can protect delicate loads and minimise

LASHING MATERIALS FOR MPP VESSEL Turnbuckles DIN 1478 Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. The Open Spelter Socket with cotter pin is available for wire rope with a diameter from 6mm to 100mm. Specification SIZE W. L. L BODY LENGTH N. W mm T mm

Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while

Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while

3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM – EN 13411-3 Product Description 3.1 T AND TKH FERRULES TKH ferrule EUROPEAN STANDARD SYSTEM – EN 13411-3 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specified in Appendix 1. The ferrules are extruded seamlessly over mandrel and the aluminium alloy

TALURIT® Round Aluminium End Stops made of Aluminium alloy not used for lifting MATCHING WIRE ROPE TO FERRULE Selection of the correct ferrule is to take account of: -The measured rope diameter -The rope type (and core) -The nominal fill factor, f (or metallic cross-sectional area factor, C) of the rope. Very important for fibre core ropes! Case 1 For single layer round strand ropes with fibre core and cable-laid ropes having a fill factor of at least 0,36 (C≥0,283) and max 0

TALURIT® Round Aluminium End Stopsmade of Aluminium alloynot used for lifting Version:0.9 StartHTML:0000000105 EndHTML:0000006747 StartFragment:0000000141 EndFragment:0000006707 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specifi ed in Appendix 1. Theferrules are extruded seamlessly over mandrel

3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM – EN 13411-3 Product Description Version:0.9 StartHTML:0000000105 EndHTML:0000005414 StartFragment:0000000141 EndFragment:0000005374 Case 1 For single layer round strand ropes with fi bre core and cable laid ropes having a fi lling factor greater than 0,45 (C>0,353) and for single layer round strand ropes with metallic core and for rotation-resistant round strand ropes having a fi ll factor up to 0,62 (C≤0,487), a fer rule

1-1/8" Closed Spelter Socket,Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".