gs fall protection safety harnesses
"
직류 전기로 자극된 탄소강 개방형 스웨이지 소켓 1/2 " 지름
Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while
ASME B30.26 강철 나사 핀 활 족쇄 넓은 본체 12 톤
Standard Dee Shackle with Safety Screw Pin Product Description Dee Shackles, also referred to as Chain Shackles, which have a Dshaped bow that is narrower than Anchor / Bow Shackles. They are designed and rated for in-line tension, they should not be side loaded,as side loading can twist or bend the bow of the shackle. When using a chain shackle, the center line of the load should always coincide with the center line of the shackle when in use. - All screw pin shackles are
가요성과 25 밀리미터 폭과 가벼운 미늘 톱니 바퀴 묶음 끈
Ratchet Buckle Endless Tie Down Strap Product Description Thanks to their tough, flexible and lightweight performance, our ratchet tie down straps are generally involving the holding down of equipment or cargo when it is being transported. They can be used for jobs like securing / lashing or fastening loads to vehicles or keeping construction materials in place. Therefore, they are also known as cargo straps, lashing straps or lorry straps. Features and Benefits • Used for
35 밀리미터 폭과 화물차 미늘 톱니 바퀴 묶음 끈 화물 묶음 끈
Ratchet Buckle Endless Tie Down Strap Product Description Thanks to their tough, flexible and lightweight performance, our ratchet tie down straps are generally involving the holding down of equipment or cargo when it is being transported. They can be used for jobs like securing / lashing or fastening loads to vehicles or keeping construction materials in place. Therefore, they are also known as cargo straps, lashing straps or lorry straps. Features and Benefits • Used for
폴리에스테르 미늘 톱니 바퀴 묶음 끈 50 밀리미터 폭은 안전하게 그리고 안전하게 내려갑니다
Ratchet Tie Down Strap with 50mm-Width Product Description Our ratchet tie down straps are made from ratchet hardware that is made to be durable and long-lasting combined with our heavy duty polyester tie down webbing. They are used for tying things down safely and securely. Features and Benefits • Used for securing/lashing and fastening loads. • All our ratchets conform to EN 12195-2:2000 safety performance requirements. • Quick release mechanism for easy use. • Produced
MPP 선박 터언버클에 쓸 재료를 세차게 때리는 DIN 1478
LASHING MATERIALS FOR MPP VESSEL Turnbuckles DIN 1478 Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. The Open Spelter Socket with cotter pin is available for wire rope with a diameter from 6mm to 100mm. Specification SIZE W. L. L BODY LENGTH N. W mm T mm
사슬 라쳇식 부하 바인더 안출된 텐셔너 장비
Forged Tensioner Rigging US STANDARD CHAINS Ratchet Type Load Binder Main features: - Alloy steel - Heat treated and hot dip galvanized - Minimum proof test load is 2 times of the working load limit. - Grade 80 chain accessories Specification MIN-MAX CHAIN SIZE (IN) HANDLE LENGTH (IN) BARREL LENGTH (IN) TAKE-UP (IN) WORKING LOAD LIMIT (lbs) PROOF LOAD (lbs) MINIMUM ULTIMATE STRENGTH (lbs) WEIGHT (lbs) 5/16-3/8 14 10 8 5400 10800 19000 10-5 3/8-1/2 14 10 8 9200 18400 33000 12
1' 크레인 중용 승강장
1" EN818-2 Grade 80 Alloy Steel Heavy Duty Lifting Chain, industrial lifting chain, high strength, for overhead lifting applications Grade 80 Lifting Chain Product Overview We are supplying Grade 80 lifting chains which are complied with EN818-2 requirements. They are available in chain diameter from 6mm to 32mm, with working load limited from 1120kg to 31500kg. Thanks to the high strength alloy steel and heat treatment process, the chains are recommended for overhead lifting
등급 80 두 다리 체인 슬링 조립품 중용 승강장
Product Overview The Grade 80 two-leg chain sling assemblies generally consist of a large Master Link at top with a shortening Clevis Grab Hook for leg length adjustment joined with a Chain Connector, and a Clevis Self-Locking Hook fitted to the bottom of the chain leg. Our Grade 80 chains and chain components are manufactured by heat treated alloy steel, and meet the requirements of ISO1835, ISO3077 and EN818-2 standards. These chains and components are designed to be high
