lifting webbing
"
12 밀리미터 기계적 합쳐진 고리쇠 밧줄 집회 부드러운 눈 파이버 코어
Soft Eye Mechanical Spliced Wire Rope Sling (Fibre Core) Product Description These slings have both ends that have been folded back on itself, mechanically pressed and secured with a ferrule. This creates an eye-shaped loop, which can be utilized for a range of applications. This soft loop has been left natural. A ‘hard-eye’ would be a loop that’s supported along the inside of the loop using a metal thimble. A wire rope sling that has soft eyes at each end will be less
파이버 코어 손은 와이어 로프 슬링 어셈블리 아연도강 소재를 접합했습니다
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
열린 아연괴 소켓과 50 밀리미터 아연 도금 강선 로프 슬링 어셈블리
Spelter Socket (Open Type) Description 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature 6 x 19 + IWRC, 6 x 37(a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Our Open Spelter Socket is also named as poured socket, equipped with cotter pin. Product Code Diameter(mm) WLL(T
아연괴 소켓과 EN 13411-4 클로즈 타잎 와이어 로프 슬링 어셈블리
Spelter Socket (Closed Type) Main features: 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature6 x 19 + IWRC, 6 x 37 (a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Closed pelter socket also named as poured socket, with a hole that is made for a pin or bolt. They are made
고리쇠 밧줄을 위한 ASME B30.9개방형 스웨이지 소켓
Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while
직류 전기로 자극된 탄소강 개방형 스웨이지 소켓 1/2 " 지름
Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while
안전 나사 안전핀 1.25 인치 WLL 12 톤과 강철 넓은 본체 활 족쇄
Tandard Bow Shackle with Safety Screw Pin Product Description The shackles have a large rounded shape that allows them to take loads from many directions without developing significant side load. - All screw pin shackles are quenched and tempered, with high quality carbon steel shackle bows and alloy steel pins. - Shackles bows are all hot dip galvanized, screws pins are painted yellow or customized upon request. - Meets or exceeds all requirements of ASME B30.26-2004 and RR
ASME B30.26 강철 나사 핀 활 족쇄 넓은 본체 12 톤
Standard Dee Shackle with Safety Screw Pin Product Description Dee Shackles, also referred to as Chain Shackles, which have a Dshaped bow that is narrower than Anchor / Bow Shackles. They are designed and rated for in-line tension, they should not be side loaded,as side loading can twist or bend the bow of the shackle. When using a chain shackle, the center line of the load should always coincide with the center line of the shackle when in use. - All screw pin shackles are
넓은 본체가 뜨겁게 족쇄를 채우는 12 톤 강철 안전성은 직류 전기로 자극된 안전핀 활 족쇄를 담급니다
Standard Dee Shackle with Safety Bolt Product Description A bolt type Dee Shackle is a more secure version used in rigging that features the combination of a bolt and nut located alongside a cotter pin,offering a double safety which prevents accidental unscrewing of the pin. • All our shackles are quenched and tempered, with high quality carbon steel shackle bows and alloy steel pins. • Shackles bows are all hot dip galvanized, pins are painted yellow or customized upon
