iso safety pin shackle
"
DNV 2.7-1 4 레그 와이어 로프 슬링
20 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set All of our DNV 2.7-1 Offshore Container Lifting Slings are produced according to our DNV Quality management approved system. When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with
12 톤 와이어 로프 슬링 어셈블리
12 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with a quad assembly and shackles. Each component of the lifting sling is specified to the capacity of the container. The sling is
DNV 2.7-1 타입 와이어 로프 리프팅 스링 집합, 4 다리 와이어 로프 스링 12.5 톤
12.5 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note,
안펜 JBB-12 슬링 하드웨어 및 액세서리 내구성 및 다재다능 리깅 솔루션
Product Description: The Anfeng JBB-12 Sling Hardware and Accessory is a high-quality, multi-purpose rigging solution designed for demanding applications across industries. Certified with CE, ISO9001, and DNV, it meets stringent safety and performance standards, including ASME B30.26-2004 and RR-C-271D. Ideal for cable machine accessories, hunting gun slings, bathroom hardware, and more, this product ensures reliability and durability in extreme conditions. Key Features &
1 인치 열린 스웨이지 소켓 와이어 로프 직류 전기로 자극된 탄소강
1" Wire Rope Sling with Open Swage Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description A swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our open design swage socket features a spring pin that can attach wire rope sling to another type of fitting. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. They are available
MPP 선박 터언버클에 쓸 재료를 세차게 때리는 DIN 1478
LASHING MATERIALS FOR MPP VESSEL Turnbuckles DIN 1478 Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. The Open Spelter Socket with cotter pin is available for wire rope with a diameter from 6mm to 100mm. Specification SIZE W. L. L BODY LENGTH N. W mm T mm
1-5/8" 철사 밧줄 새총 회의, 5:1 닫히는 Swage 소켓
1-5/8" Wire Rope Sling with Closed Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Description Closed spelter socket is a common type of socket. It has a hole that is made for a pin or bolt. Closed and open spelter socket also named as poured socket. Our Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization
열린 아연괴 소켓과 50 밀리미터 아연 도금 강선 로프 슬링 어셈블리
Spelter Socket (Open Type) Description 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature 6 x 19 + IWRC, 6 x 37(a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Our Open Spelter Socket is also named as poured socket, equipped with cotter pin. Product Code Diameter(mm) WLL(T
아연괴 소켓과 EN 13411-4 클로즈 타잎 와이어 로프 슬링 어셈블리
Spelter Socket (Closed Type) Main features: 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature6 x 19 + IWRC, 6 x 37 (a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Closed pelter socket also named as poured socket, with a hole that is made for a pin or bolt. They are made
