iso 9001 wire rope lifting slings
"
1-1/8 " 와이어 로프 엔드 스탑, 닫힌 아연괴 소켓
1-1/8" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
EN 13411-4 70 밀리미터 와이어 로프 슬링 어셈블리, 5시 1분 짧은 활 소켓
70mm Wire Rope Sling with Short Bow Socket, Closed Spelter Socket Sling, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Short Bow Socket meets RR-S-550D (type B) requirements and is
1 인치 열린 스웨이지 소켓 와이어 로프 직류 전기로 자극된 탄소강
1" Wire Rope Sling with Open Swage Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description A swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our open design swage socket features a spring pin that can attach wire rope sling to another type of fitting. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. They are available
3/8 " 와이어 로프 슬링 어셈블리, ASME B30.9 닫힌 스웨이지 소켓
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
FF-T-276B 연강 3 인치 골무 고리쇠 밧줄, 골무 눈 붕대
3" Wire Rope Sling with Heavy Duty Thimble, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Heavy Duty Thimble is designed for use with high-performance wire rope. The thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and deformation of the
1770 MPa 스틸 코어 와이어 로프는 4 다리로 던집니다
Two-leg Swaged Wire Rope Sling (Steel Core) The wire rope slings feature 6 x 37 (a)+ IWRC construction classification, with 1770 MPa in tensile strength. Product Description - Surface treatment of wire ropes can be galvanized and grease free,galvanized with grease and uncoated with grease. - The wire rope structure, tensile strength and working load limit could be customized upon request. - Safety factor is 5:1 for the sling, 4:1 for the Master Link and Hook, and 6:1 for the
12 밀리미터 기계적 합쳐진 고리쇠 밧줄 집회 부드러운 눈 파이버 코어
Soft Eye Mechanical Spliced Wire Rope Sling (Fibre Core) Product Description These slings have both ends that have been folded back on itself, mechanically pressed and secured with a ferrule. This creates an eye-shaped loop, which can be utilized for a range of applications. This soft loop has been left natural. A ‘hard-eye’ would be a loop that’s supported along the inside of the loop using a metal thimble. A wire rope sling that has soft eyes at each end will be less
파이버 코어 손은 와이어 로프 슬링 어셈블리 아연도강 소재를 접합했습니다
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
놓인 대직경 케이블은 아연 도금 강선 로프를 던집니다
Cable Laid Sling (Large Diameter Wire Rope Sling) Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific application and the strength required for the lifting set. They are generally
