12
"
EN818-2 두 다리 초커 히치 끝없는 리프팅 체인 슬링
EN818-2 Two Leg Choker Hitch Endless Lifting Chain Sling Endless Chain Sling (assembly) Product Overview Our Endless Chain Sling in Grade 80 has a single chain length to support the lifted load. The sling is flexible, temperature resistant, and strong enough to handle a wide array of loading conditions. It will benefit the lifting application when using an Endless Chain Sling over a straight leg equivalent if you have different hitching requirements and need to make sure a
등급 80 체인 슬링 부속물 와이어 로프를 높이는 오버헤드는 26 밀리미터를 던집니다
26mm Grade 80 Lifting Chain Sling With Chain Accessories Wire Rope Sling Wire Rope Sling Endless Chain Sling Grade 80, double loops, with chain accessories, industrial Heavy Lift Chain Sling, for overhead lifting, chain sling assembly Product Overview Double-leg Endless chain slings have two separate links of chain that provide support for the load. The chain slings are flexible, temperature resistant, and strong enough to handle a wide array of loading conditions. Our
1개의 인치 규격 WLL 8.5 톤 넓은 본체 족쇄
1" Standard Bow Shackle with safety screw pin, type JB, WLL 8.5 tons, Anchor Shackle Screw Pin Anchor / Bow Shackles Product Description Bow shackles and anchor shackles are both used interchangeably and refer to a type of shackle with a larger, round “O” shaped bow. On a screw pin bow shackle, a threaded pin is inserted through the ears and tightened down. They are not recommended for permanent or long-term installations. The shackles have a large rounded shape that allows
ISO 탄소강 JS Ｄ 족쇄 스크루 핀 타입
3/4" Standard Dee Shackle with safety screw pin, type JS, WLL 4.75 tonne, Chain Shackle Screw Pin Dee Shackles / Chain Shackles Product Description On our screw pin dee shackle, a threaded pin is inserted through the ears and tightened down. The shackles have a large rounded shape that allows them to take loads from many directions without developing significant side load. Dee Shackles, also referred to as Chain Shackles, which have a D-shaped bow that is narrower than Anchor
KB 7/16 " 타입 WLL 2.7 톤 안전성 활 족쇄 아연도강
7/16" Standard Bow Shackle with safety screw pin, type KB, WLL 2.7 tonne, Galvanized Steel Anchor Bow Shackle Screw Pin Anchor / Bow Shackles Product Description On a screw pin bow shackle, a threaded pin is inserted through the ears and tightened down. The screw pin configuration is best for use in applications that are temporary, or require repeated and/or quick connections and disconnections. The shackles have a large rounded shape that allows them to take loads from many
GB/T 16762 Four 다리 고리쇠 밧줄, 루프와 32 밀리미터 직류 전기로 자극된 케이블 붕대
32mm Four-leg steel wire rope slings, fibre core, swaged wire rope with Flemish Eye Sleeve and Thimble, equipped with Master Link Four-leg wire rope sling assembly, fibre core, Soft Eye and Eye Sling Description All our four-leg steel wire rope sling assemblies are produced according to our DNV Quality Management Approved System. The sling assemblies with fibre core feature 6 x 37 +FC construction, with 1670MPa in tensile strength. Each leg is a single soft eye wire rope
1 인치 열린 스웨이지 소켓 와이어 로프 직류 전기로 자극된 탄소강
1" Wire Rope Sling with Open Swage Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description A swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our open design swage socket features a spring pin that can attach wire rope sling to another type of fitting. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. They are available
ASME B30.9 0.5 인치 열린 스웨이지 소켓 와이어 로프
1" Open Swage Socket (with cotter pin), End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Open Swage Socket is an open type swage socket with a spring pin. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Open Swage Socket is available for wire rope with a diameter from 6.35mm to 50.8mm. - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19
3/8 " 와이어 로프 슬링 어셈블리, ASME B30.9 닫힌 스웨이지 소켓
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
